Shopping cart contents


Reset parameters

Chuck width/diameter

Chuck length/diameter

Workpiece width
Workpiece length
Magnet technology
Additional features
Poles  Polohoha pólů k délce upínače

Neomicro permanent magnetic chuck for surface grinding

When to choose a Neomicro magnetic chuck:

The Neomicro permanent chuck with an exceptional holding force combines high quality with a favourable price. It is simple and low maintenance clamping device.. It is suitable primarily as an accessory to grinders intended for precise surface grinding of very small and thin parts up to large workpieces. It is suitable for electrical discharge machining.


  • Solid and waterproof design
  • High stability and accuracy of the chuck during surface grinding
  • Possibility to clamp even the thinnest parts
  • Long life span thanks to the fixed top plate, which can be reground many times Easy operation and low maintenance
  • Durable switching mechanism

Related products


This product can be rented. Just create an inquiry and check the rent box.


Are you not sure that this product is the right choice? Send us your inquiry and our representatives will be happy to advise you.

Catalog number Chuck dimension Height [mm] Weight [kg] Availability (approximate) Price without VAT
(valid for EU flag EU only)
250x500 mm 56,00 57,00 5 - 6 weeks
1,708 EUR

Detailed description:

The Neomicro permanent magnetic chuck is ideal for precise grinding of small and thin as well as large pieces or for electrical discharge machining (EDM). Its structure is waterproof. It can be cooled with coolant and immersed in dielectric liquid. The upper top plate composed of brass and steel lamellae ensures high stability, accuracy, and efficiency of clamping using the maximum concentration of magnetic force into the workpiece. A long life span is ensured by the top plate with a regrinding limit up to 7 mm.

Important parameters:

  • Application: Grinding, EDM
  • Technology: Permanent
  • Holding force: 100 N/cm2
  • Min. workpiece size: 4 x 4 x 1 mm
  • Poles: Transverse
  • Regrinding limit: 7 mm
  • Pole pitch: T1.9 1.4+0.5 mm - steel/brass


  • Precise surface grinding of small and thin, as well as large parts
  • Also suitable for electrical discharge machining (EDM)

Scope of supply:

  • Magnetic chuck
  • Set of clamps
  • Allen key
  • Rear and side stop blocks
  • Instructions for use


Model W (mm) L (mm) H (mm) Weight (kg)
NEOC100175 100 175 49 7
NEOC100250 100 250 49 10
NEOC130255 130 255 49 13
NEOC150250 150 250 51 15
NEOC150300 150 300 51 18
NEOC150350 150 350 51 22
NEOC150400 150 400 51 25
NEOC150450 150 450 51 28
NEOC200400 200 400 51 34
NEOC200450 200 450 51 37
NEOC200500 200 500 51 41
NEOC200600 200 600 51 49
NEOC250500 250 500 56 56
NEOC300600 300 600 56 81

This page uses cookies as a service provider. You can edit the usage and availability of cookies in your browser settings. I Agree