Shopping cart contents
Useful information


Chuck width/diameter

Chuck length/diameter

Magnet technology

Fixar sine table for accurate angular grinding and EDM

When to choose a Fixar compound sine table:

The Fixar compound sine table with a Neomicro permanent chuck is designed for precise angle grinding. You will get excellent variability of machining during workpiece clamping because the Fixar allows tilting on the longitudinal and the transverse axes at the same time.


  • Tilting is possible on both axes, longitudinal and transverse
  • Setting of angles in the longitudinal range 0 – 45°, in the transverse 0 – 30°
  • Unique design of the bearing
  • Solid hardened base plate
  • Excellent accuracy +/- 5 seconds of arc even after a longer period of use
  • Parallelism (paralleling): +/- 5 micrometres per 100 mm
  • Equipped with a high-quality Neomicro magnetic chuck with fine pole layout (optionally, the table can be equipped with a different chuck, e.g. Neomill or Electrofine)

Related products


This product can be rented. Just create an inquiry and check the rent box.


Are you not sure that this product is the right choice? Send us your inquiry and our representatives will be happy to advise you.

Catalog number Dimension Height [mm] Availability (approximate) Price without VAT
(valid for EU flag EU only)
100x175 mm 104.00 on request
On request
130x255 mm 120.00 on request
On request
150x300 mm 123.00 on request
On request
150x350 mm 123.00 on request
On request
200x400 mm 124.00 on request
On request

Detailed description:

The Fixar compound sine table is a high precise device designed for workpiece clamping during precise angle grinding, electrical discharge machining and measuring. It enhances the efficiency of work during machining because it offers the possibility to tilt the workpiece on both axes with high accuracy.

You set the angles simply by using the end gauges based on the sine principle. Unique design of the bearing along with the hardened base plate and the side guidance provide extreme accuracy even after a long period of use. The Neomicro magnetic chuck is part of the transverse sine table as it is stable and has a high holding force without deformation of the workpiece up to 100 N/cm2.

Important parameters:

  • Application: Grinding, measuring, EDM
  • Technology: Permanent
  • Holding force: 100 N/cm2
  • Min. workpiece size: 4 x 4 x 1 mm
  • Poles: Transverse
  • Regrinding limit: 7 mm
  • Pole pitch: T1.9 1.4+0.5 mm (steel/brass)
  • Guarantee: 2 years

Additional information:

The Fixar compound sine table allows tilting on both axes at the same time. If you only need tilting on one axis (longitudinal or transverse), have a look at the Fixar simple sine table.

Scope of supply:

  • Sine table
  • Allen keys
  • Table for quick angle setting
  • Instructions for use


  • Accurate angle surface grinding Electrical discharge machining – EDM
  • Measuring
Fixar drawing


Model W (mm) L (mm) H (mm) C x D (mm) S (mm) Weight (kg)
SINEC100175 100 175 104 210 x 140 165/110 15
SINEC130255 130 255 120 290 x 170 245/140 32
SINEC150300 150 300 123 335 x 190 340/160 49,5
SINEC200400 200 400 124 435 x 240 390/210 73