Electromagnetic chuck Circu EM

When to use Circu EM circular magnetic chuck:

The Circu EM is an electromagnetic chuck with radial pole layout designed for installation on rotary tables of grinders and lathes for stable clamping of rotary workpieces with circular or cylindrical shapes such as bearing rings, bushings, saw blades, etc.Due to the high holding force and the possibility of its control, this chuck is also suitable for thin workpieces.

Advantages:

Continuous regulation of the clamping force for easy centering and clamping of even thin workpieces
Available also with a T-slot top plate
Quick and effective demagnetization via control unit
Simple control over the clamping process via control unit

Related products

Neostar permanent magnetic chuck
Neostar round chuck for clamping the workpieces during milling and round grinding.

Electro-permanent circular magnetic chuck Circu EP
The electro-permanent chuck suitable for surface grinding and turning.

Control units EM-CU
The control unit controls the magnet and starts demagnetizing it when switching off.

This product can be rented. Just create an inquiry and check the rent box.

Are you not sure that this product is the right choice? Send us your inquiry and our representatives will be happy to advise you.

Display as table

Catalog number	Chuck dimension	Height [mm]	Availability (approximate)	Price without VAT (valid for EU only)
EM400	D400 mm	90.00	on request	On request
EM500	D500 mm	90.00	on request	On request
EM600	D600 mm	100.00	on request	On request
EM700	D700 mm	100.00	on request	On request
EM800	D800 mm	100.00	on request	On request
EM1000	D1000 mm	100.00	on request	On request
EM1250	D1250 mm	123.00	on request	On request
EM1500	D1500 mm	120.00	on request	On request
EM2000	D2000 mm	130.00	on request	On request

Important parameters:

Technology: Electromagnet
Holding force: 120 N/cm²
Poles: radial
Regrinding limit: 8 mm
Guarantee: 2 years

Additional information:

The pole plate can be equipped with T-slots for mounting pole extensions on request. This provides free access to the workpiece for machining the outside, inside diameter and front per one clamping, or it is possible to drill through the workpiece body. Power for the chuck is provided by a suitable control unit. The chuck can be connected via the slip ring in the machine tool spindle, or through the connector located directly on the magnetic chuck.

Use:

machining external and internal surfaces of round and ring shaped workpieces on vertical grinders
turning

Catalog number	D (mm)	H (mm)	Weight (kg)	Voltage (V)
Circu EM 400	400	90	76	110
Circu EM 500	500	90	120	110
Circu EM 600	600	100	195	110
Circu EM 700	700	100	265	110
Circu EM 800	800	100	365	110
Circu EM 1000	1000	100	550	110
Circu EM 1250	1250	123	990	110
Circu EM 1500	1500	120	1550	110

Catalogs

Catalog list Circu EM

PRODUCT PARAMETERS