Neospark permanent magnetic chuck for electrical discharge machining

When to choose a Neospark permanent magnetic chuck:

The Neospark permanent magnetic chuck is suitable for workpiece clamping during electrical discharge machining. The high holding force and fine pole pitch make it possible to clamp small and thin workpieces. Due to its very low structure, you do not lose any working area. Moreover, this chuck offers comfortable control from the top of the magnet, so it is possible to use the entire area of the submersion working tank of your EDM machine better.

Advantages:

Solid steel base with integrated control system
Efficient electrical discharge machining of hard materials due to the high holding force
Simple operation and maintenance
Waterproof design
Very low magnet height
Magnet switch on the upper plate for easy operation Double magnetic system with neodymium magnets

Buy

Related products

Neomicro permanent magnetic chuck for surface grinding
Magnetic chuck with fine poles for precise grinding.

HD hand-held demagnetizer for demagnetizing large and complex components
HD demagnetizer for demagnetizing components.

This product can be rented. Just create an inquiry and check the rent box.

Are you not sure that this product is the right choice? Send us your inquiry and our representatives will be happy to advise you.

Display as table

Catalog number	Chuck dimension	Height [mm]	Availability (approximate)	Price without VAT (valid for EU only)
NEOK100175	100x175 mm	32.00	5 - 6 weeks	On request
NEOK130255	130x255 mm	32.00	5 - 6 weeks	On request
NEOK150150	150x150 mm	35.00	5 - 6 weeks	On request
NEOK150250	150x250 mm	35.00	5 - 6 weeks	On request
NEOK150300	150x300 mm	35.00	5 - 6 weeks	On request
NEOK150350	150x350 mm	35.00	5 - 6 weeks	On request
NEOK150450	150x450 mm	35.00	5 - 6 weeks	On request
NEOK200300	200x300 mm	35.00	5 - 6 weeks	On request
NEOK200400	200x400 mm	35.00	5 - 6 weeks	On request
NEOK200600	200x600 mm	35.00	5 - 6 weeks	On request

Detailed description:

The Neospark magnetic chuck with low structural height is primarily developed for electrical discharge machining but it is also suitable for precise surface grinding of smaller workpieces. The high holding force of the double magnetic system ensures clamping stability. Operators of the chuck will appreciate the very easy operation from the upper side of the magnet and the minimum maintenance.

Important parameters:

Application: EDM
Technology: Permanent
Holding force: 100 N/cm²
Min. workpiece size: 4 x 4 x 1 mm
Poles: Transverse
Regrinding limit: 7 mm
Pole pitch: T1,9 1,4 + 0,5 mm (steel/brass)
Guarantee: 2 years

Scope of supply:

Magnetic chuck
Set of clamps
Allen key
Certificate
Instructions for use

Use:

Electrical discharge machining EDM
Possibility of immersion in dielectric liquid Precise grinding of very small and thin parts

Parameters

Model	W (mm)	L (mm)	H (mm)	C (mm)	Weight (kg)
NEOK100175	100	175	32	120	5
NEOK130255	130	255	32	200	9
NEOK150150	150	150	35	95	7
NEOK150300	150	300	35	245	13
NEOK150350	150	350	35	295	15
NEOK150450	150	450	35	395	19
NEOK200400	200	400	35	342	23