Detailed description:
The Neopower magnetic chuck will provide you with the highest possible holding force of all the permanent magnets that we make. The double magnetic system with neodymium magnets exerts a unique force up to 160 N/cm2, which you can use during milling, drilling, and threading.
During milling and other machining, the magnet will provide you with variable setting and multiple operations possibility on a single clamp, while retaining precision thanks to its very high holding force. You will obtain much higher production efficiency.
Important parameters:
- Application: Milling
- Technology: Permanent
- Holding force: 160 N/cm2
- Min. workpiece size: 75 x 75 x 10 mm
- Poles: Transverse
- Regrinding limit: 8 mm
- Pole pitch: T19 15 +4 mm (steel/epoxy resin)
- Guarantee: 2 years
Scope of supply:
- Magnetic chuck
- Rear and side stop blocks
- Set of clamps
- Allen key
- Certificate
- Instructions for use
Use:
- Surface milling, contour milling, pocket milling and slotting
- Used for high speed machining
- Drilling and threading
Parameters
Model |
W (mm) |
L (mm) |
H (mm) |
Weight (kg) |
NEOP300600 |
300 |
600 |
63 |
90 |